|
|
|
| The
EZ-Gas burner converts from propane to natural gas with
just an orifice change - no conversion kit needed. Factory
packed with combustion control and gas fuel train. Does
not require a refractory liner - fires with or without a
combustion chamber. Proven in extensive boiler and furnace
testing, these burners will meet your needs for residential
gas burning applications. |
| |
|
|
|
Input
|
|
50,000
to 275,000 Btuh |
|
Fuels
|
|
Natural Gas or Propane Gas
Maximum Supply Pressure: 14 inches w.c.
Minimum Supply Pressure: 5.0 inches w.c.
Manifold Pressure: 3.5 inches w.c. |
|
Control
|
|
Carlin
60200FR Microprocessor Control
4 sec. Trial for Ignition (TFI)
1.3 Sec. FFRT
Pre-purge
and post-purge
Serviceman Reset Protection
Latch-up after three consecutive lockouts
Interrupted Duty Ignition
Recyle on Flame Failure
|
|
Electrical
|
|
Power:
120 vac, 60Hz, 1-Phase
Current: Approximately 2.0 Amps
Limit Circuit Input: 120 vac, 60 Hz
Motor: 1/15 HP, 3450 RPM, 60 Hz
Motor Frame: 48 Frame, "M" Flange
Fuel Valve Power: 120 vac, 60 Hz |
|
Ignition
|
|
Carlin
Model 41800 Solid State Electronic Ignition
Ignition Voltage: 9,000 volts
|
|
Orifice
Selection
|
|
|
|
Agencies
|
|
UL
Listed: US & Canada - US per ANSI Z21.17, Canada per
CSA 2.7 |
|
|
|
|
|
| |
|
|
