Carlin Combustion
 
The 201GAS burner converts from propane to natural gas with just an orifice change - no conversion kit needed. Factory packed with combustion control and gas fuel train. Does not require a refractory liner - fires with or without a combustion chamber. Proven in extensive boiler and furnace testing, these burners will meet your needs for residential gas burning applications.
     
Input
  150,000 to 399,000 Btuh
 
Fuels
  Natural Gas or Propane Gas
  Maximum Supply Pressure: 14 inches w.c.
Minimum Supply Pressure: 5.0 inches w.c.
Manifold Pressure: 3.5 inches w.c.
     
Control
 

Carlin 60200FR Microprocessor Control
4 sec. Trial for Ignition (TFI)
1.3 Sec. FFRT

Pre-purge and post-purge
Serviceman Reset Protection
Latch-up after three consecutive lockouts
Interrupted Duty Ignition
Recyle on Flame Failure

     
Electrical
  Power: 120 vac/60Hz/1-Phase
    Current: Approximately 2.5 or 4.4 amps
  Limit Circuit Input: 120 vac/60 Hz
 

Motor: 1/6 or 1/4 HP, 3450 RPM, 60 Hz

    Motor Frame: 48 Frame, "N" Flange
  Fuel Valve Power: 120 vac/60 Hz
 
Ignition
 

Carlin Model 41800 solid state electronic ignition

  Ignition Voltage: 9,000 volts
     
Orifice Selection
 
 
Agencies
  UL Listed: US & Canada - US per ANSI Z21.17, Canada per CSA 2.7